Samsung Washer Error Codes: What They Mean

Rabia Tingat

Your Samsung washer just stopped mid-cycle and flashed a code on the display. It might look like 4C, 5C, or UE. What does it mean?

Samsung washers use short codes to tell you what's wrong. The codes are like a hint from the machine. Once you know what they stand for, many problems take only a few minutes to fix.

This guide groups the most common codes by problem type. Find your code, try the fix, and learn when it's time to call for washer repair. We also fix Samsung appliances of all kinds.

One tip first. On many models, the "E" and "C" versions of a code mean the same thing. So 4E and 4C are the same error. Codes can also vary slightly by model, so check your manual.


First Step for Any Code


Turn the washer off. Unplug it for a minute. Plug it back in and restart. A power reset clears many minor glitches.


Water Isn't Filling: 4C, 4E, nF


This means the washer isn't getting enough water.

  • Make sure both water faucets are fully open.
  • Check the hoses for kinks.
  • Clean the inlet filter screens where the hoses connect.
  • Check your home's water pressure.


Water Isn't Draining: 5C, 5E, SE, nd


The washer can't pump out water.

  • Open the drain filter at the bottom front. Clear out coins, lint, and socks.
  • Check the drain hose for a kink or clog.
  • Make sure the hose isn't pushed too far into the drain pipe.


Door or Lid Problem: dC, dE, dE1, dE2


The washer thinks the door isn't closed or locked.

  • Close the door firmly. Make sure no clothing is caught.
  • Check the latch for damage.
  • On some models, dC can also mean an unbalanced load.

A broken latch or lock needs a technician.


Unbalanced Load: UE, Ub, U6


The clothes are bunched up on one side.

  • Pause the cycle and redistribute the load.
  • Wash large items, like comforters, with a few towels.
  • Check that the washer is level on the floor.


Leak or Water Level Problem: LC, LE, 1E


The washer detects water where it shouldn't be, or a level sensor issue.

  • Turn off the water and unplug the washer.
  • Look around the hoses and the base for leaks.
  • Check for too much detergent.


Overflow: OC, OE


There's too much water inside. Turn off the water supply. Then check for a stuck fill valve. This usually needs a technician.


Front-Load Washer Door Won't Open: How to Fix It


Too Many Suds: SUD


Too much detergent makes foam that confuses the machine. Use HE detergent and the right amount. Run a rinse cycle to clear the suds.


Motor and Power Codes: 3C, 3E, 8C, 8E, 9C, 9E


These codes point to the motor, a sensor, or a power issue.

  • Try a power reset.
  • Plug the washer directly into a wall outlet, not a power strip.
  • Reduce an oversized load.

If the code comes back, call a technician. These are usually electrical or part failures.


Other Codes You May See


  • tC or tE: A temperature sensor problem.
  • bE: A stuck panel button.
  • Cb or C6: The washer is calibrating.


When to Call for Repair


Call a technician if the code returns after a reset. Also call if you see leaks, smell burning, or if the drum won't turn.


Samsung Washer Error Code FAQs


Q: What does the 4C error code mean on a Samsung washer?
A: It's a water supply error. The washer isn't filling properly.


Q: What does the 5C code mean on a Samsung washer?
A: It's a drain error. Check the drain filter and hose.


Q: What does UE mean on a Samsung washer?
A: The load is unbalanced. Redistribute the clothes.


Q: How do I reset a Samsung washer?
A: Unplug it for a minute, then plug it in and restart.


Q: What does the dC code mean on a Samsung washer?
A: It often points to a door issue, though on some models it means an unbalanced load.


Final Thoughts on Samsung Washer Error Codes


An error code can look scary, but it’s actually helpful. It tells you where to look. A 4C points to the water supply. A 5C points to the drain. A UE points to an uneven load. Many of these can be fixed in a few minutes with a power reset, a clean filter, or a rearranged load.

Remember that codes can vary by model, so check your manual if something doesn’t match. Codes tied to the motor, sensors, or power, like 3C, 8C, and 9C, often mean a part has failed. If a code keeps coming back after a reset, don’t keep restarting the machine.

Our team repairs Samsung washers and other brands, with same-day service available 24/7. Call (844) 332-1026 or contact us online.